Blog

PRODUCT INFORMATIONSINGLE STAGE 2 GAUGE REGULATOR
DESCRIPTION
This single-stage two-gauge regulator is designed to step the
pressurised contents of a compressed gas cylinder down to a
pressure that can be used in Oxy/Acetylene Cutting/Welding or
Argon/CO2 Shielded MIG / TIG welding.

INFORMATIONThe design of this regulator ensures that pressure is reduced from cylinder pressure (300 Max Bar Argon / Oxygen, 20
Bar Acetylene) and can be set to a suitable working pressure. These actions take place in a single chamber making this
particular model ideal for use where precise pressure settings over a period of time are not essential.
This product features two gauges, which display bottle contents and output pressure. Output pressure is controlled by the
centre dial (pressure adjustment knob) which, when fully wound out, sets the pressure to 0 bar.
This model is of bottom-entry design, making it best suited to top-outlet valve cylinders. They can be used with side-outlet
valve cylinders with the addition of a 90° adaptor (DA90LH/RH).
In addition, a range of Side-entry regulators are available with the part number suffix ‘SEEXT’.

NOTES
The Weldability Gas Equipment range features a complete portfolio of regulators, which caters for Oxygen, Acetylene,
Argon, Propane and Nitrogen.
Single-stage one and two gauge, multistage two-gauge, single-stage indicator and single-stage plugged models are
available to suit differing requirements in accuracy and type of application.
All Weldability regulators are manufactured to a high level of quality to ensure safety and reliability.

ARTICLES & ACCESSORIES TECHNICAL INFORMATION
For further information, contact Weldability | Sif technical support on 0870 330 7757 or email service@weldability-sif.com
Doc Ref: SIF/PI/AE3005LX

Part Number Product Description
AE3005LX 1S 2G ARGON REGULATOR
Oxy/Argon Acetylene
Maximum Outlet Pressure 10 Bar 1.5 Bar
Inlet Pressure 300 Bar 20 Bar
This product conforms to the criteria laid out under
British Standard BS EN ISO 2503 : 2009

AE3005LX SHEILDING GAS REGULATOR FOR MIG AND TIG WELDING

PRODUCT INFORMATIONSINGLE STAGE 2 GAUGE REGULATOR
DESCRIPTION
This single-stage two-gauge regulator is designed to step the
pressurised contents of a compressed gas cylinder down to a
pressure that can be used in Oxy/Acetylene Cutting/Welding or
Argon/CO2 Shielded MIG / TIG welding.

INFORMATIONThe design of this regulator ensures that pressure is reduced from cylinder pressure (300 Max Bar Argon / Oxygen, 20
Bar Acetylene) and can be set to a suitable working pressure. These actions take place in a single chamber making this
particular model ideal for use where precise pressure settings over a period of time are not essential.
This product features two gauges, which display bottle contents and output pressure. Output pressure is controlled by the
centre dial (pressure adjustment knob) which, when fully wound out, sets the pressure to 0 bar.
This model is of bottom-entry design, making it best suited to top-outlet valve cylinders. They can be used with side-outlet
valve cylinders with the addition of a 90° adaptor (DA90LH/RH).
In addition, a range of Side-entry regulators are available with the part number suffix ‘SEEXT’.

NOTES
The Weldability Gas Equipment range features a complete portfolio of regulators, which caters for Oxygen, Acetylene,
Argon, Propane and Nitrogen.
Single-stage one and two gauge, multistage two-gauge, single-stage indicator and single-stage plugged models are
available to suit differing requirements in accuracy and type of application.
All Weldability regulators are manufactured to a high level of quality to ensure safety and reliability.

ARTICLES & ACCESSORIES TECHNICAL INFORMATION
For further information, contact Weldability | Sif technical support on 0870 330 7757 or email service@weldability-sif.com
Doc Ref: SIF/PI/AE3005LX

Part Number Product Description
AE3005LX 1S 2G ARGON REGULATOR
Oxy/Argon Acetylene
Maximum Outlet Pressure 10 Bar 1.5 Bar
Inlet Pressure 300 Bar 20 Bar
This product conforms to the criteria laid out under
British Standard BS EN ISO 2503 : 2009

Food Grade Carbon Dioxide CO2 Gas 34kg Liquid offtake for Glass Frosting Dip Tube / Siphon Tube

Food Grade Carbon Dioxide CO2 Gas 15kg Liquid offtake for Glass Frosting / Siphon Tube

Food Grade Liquid CO2 for Glass Frosting – 15kg

Food Grade Carbon Dioxide CO2 Gas Refill 6.35kg Liquid offtake for Glass Frosting / Siphon Tube

Food Grade Liquid CO2 for Glass Frosting – 6.35kg

Contract filling of Customer owned Tecatlantis 1L CO2 Cylinder

Adams Gas can offer a refill service for customers that have purchased their own  Aquatlantis / Tecatlantis  Pressurized Co2 aluminium cylinder 1 litres  refillable Co2 cylinders.

These cylinders offer a great solution that will ensure a sufficient, safe and reliable supply of Co2 to your aquarium.

To have your cylinder refilled, simply bring your cylinder into to our filling depot at Margate, or send us the cylinder so that we can fill your cylinder at a fraction of the cost.

Other cylinder brands can be filled as well.

All cylinders will be inspected before filling for damage, suitability and test dates to ensure the safety of you and our filling staff.

Please call us before bringing your cylinder is so that we can advise you on the best days to bring in your cylinder so that it can be filled while you wait. Alternatively, simply drop off your cylinder and collect in a couple of days

VZ181215LSG3 1.2MM SG3 MIG WIRE (15KG) REEL

Our G4Si1-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, auto-body and repair & maintenance applications.

DESCRIPTION 
Copper coated double-deoxidised mild steel MIG wire, with increased silicon and manganese content, for welding unalloyed and low-alloyed mild and medium tensile steels requiring good impact toughness down to -20°C. Manufactured with a high-quality copper finish for improved feeding. Precision layer wound. Weldability SG3 typically provides a higher ultimate tensile strength over standard Weldability A18.

WELDING POSITIONS 
Suitable for use in general fabrication, construction, ship building, tanks and boilers, repair and auto-body applications. Comprises increased manganese and silicon to provide improved mechanical properties.

TYPICAL WELD METAL COMPOSITION   
C 0.1 %

Si 1.0 %

Mn 1.75 %

TYPICAL MECHANICAL PROPERTIES

Melting Point 1450°C

Ult Tensile Strength 550-600 N/mm²

Impact Value 70J @ -20°C

Elongation 24%

MATERIAL TO BE WELDED
Can be used on a wide variety of mild steels, structural steel, fine-grain steel, pipe steel, boiler steel and cast steel. Popular in the construction, power generation and offshore sectors.

SHEILDING GAS

CO2 or Argon/CO2

VZ181015LSG3 1.0MM SG3 MIG WIRE (15KG) REEL

Our G4Si1-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, auto-body and repair & maintenance applications.

DESCRIPTION 
Copper coated double-deoxidised mild steel MIG wire, with increased silicon and manganese content, for welding unalloyed and low-alloyed mild and medium tensile steels requiring good impact toughness down to -20°C. Manufactured with a high-quality copper finish for improved feeding. Precision layer wound. Weldability SG3 typically provides a higher ultimate tensile strength over standard Weldability A18.

WELDING POSITIONS 
Suitable for use in general fabrication, construction, ship building, tanks and boilers, repair and auto-body applications. Comprises increased manganese and silicon to provide improved mechanical properties.

TYPICAL WELD METAL COMPOSITION   
C 0.1 %

Si 1.0 %

Mn 1.75 %

TYPICAL MECHANICAL PROPERTIES

Melting Point 1450°C

Ult Tensile Strength 550-600 N/mm²

Impact Value 70J @ -20°C

Elongation 24%

MATERIAL TO BE WELDED
Can be used on a wide variety of mild steels, structural steel, fine-grain steel, pipe steel, boiler steel and cast steel. Popular in the construction, power generation and offshore sectors.

SHEILDING GAS

CO2 or Argon/CO2

VZ180815LSG3 0.8MM SG3 MIG WIRE (15KG) REEL

Our G4Si1-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, auto-body and repair & maintenance applications.

DESCRIPTION 
Copper coated double-deoxidised mild steel MIG wire, with increased silicon and manganese content, for welding unalloyed and low-alloyed mild and medium tensile steels requiring good impact toughness down to -20°C. Manufactured with a high-quality copper finish for improved feeding. Precision layer wound. Weldability SG3 typically provides a higher ultimate tensile strength over standard Weldability A18.

WELDING POSITIONS 
Suitable for use in general fabrication, construction, ship building, tanks and boilers, repair and auto-body applications. Comprises increased manganese and silicon to provide improved mechanical properties.

TYPICAL WELD METAL COMPOSITION   
C 0.1 %

Si 1.0 %

Mn 1.75 %

TYPICAL MECHANICAL PROPERTIES

Melting Point 1450°C

Ult Tensile Strength 550-600 N/mm²

Impact Value 70J @ -20°C

Elongation 24%

MATERIAL TO BE WELDED
Can be used on a wide variety of mild steels, structural steel, fine-grain steel, pipe steel, boiler steel and cast steel. Popular in the construction, power generation and offshore sectors.

SHEILDING GAS

CO2 or Argon/CO2

VZ181215LW SG2 1.2MM LAYER A18 WIRE 15KG REEL

Our A18-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, auto-body and repair & maintenance applications.

DESCRIPTION 
Copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels, for impact toughness down to -20C. Manufactured with a high-quality copper finish for improved feeding. Precision layer wound.

WELDING POSITIONS 
Suitable for use in general fabrication, construction, tanks and boilers, repair and auto-body applications. Comprises manganese and silicon to provide good mechanical properties.

MATERIAL TO BE WELDED 
Can be used on a wide variety of mild steels, structural steel, fine-grain steel, pipe steel, boiler steel and cast steel.

SHEILDING GAS

CO2 or Argon/CO2

VZ181015LW SG2 1.0MM LAYER A18 WIRE 15KG REEL

Our A18-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, auto-body and repair & maintenance applications.

DESCRIPTION 
Copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels, for impact toughness down to -20C. Manufactured with a high-quality copper finish for improved feeding. Precision layer wound.

WELDING POSITIONS 
Suitable for use in general fabrication, construction, tanks and boilers, repair and auto-body applications. Comprises manganese and silicon to provide good mechanical properties.

MATERIAL TO BE WELDED 
Can be used on a wide variety of mild steels, structural steel, fine-grain steel, pipe steel, boiler steel and cast steel.

SHEILDING GAS

CO2 or Argon/CO2

VZ1808050L SG2 1.0MM LAYER A18 WIRE 5KG REEL

Our A18-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, auto-body and repair & maintenance applications.

DESCRIPTION 
Copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels, for impact toughness down to -20C. Manufactured with a high-quality copper finish for improved feeding. Precision layer wound.

WELDING POSITIONS 
Suitable for use in general fabrication, construction, tanks and boilers, repair and auto-body applications. Comprises manganese and silicon to provide good mechanical properties.

MATERIAL TO BE WELDED 
Can be used on a wide variety of mild steels, structural steel, fine-grain steel, pipe steel, boiler steel and cast steel.

SHEILDING GAS

CO2 or Argon/CO2

VZ180815LW SG2 0.8MM LAYER A18 WIRE 15KG REEL

Our A18-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, auto-body and repair & maintenance applications.

DESCRIPTION 
Copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels, for impact toughness down to -20C. Manufactured with a high-quality copper finish for improved feeding. Precision layer wound.

WELDING POSITIONS 
Suitable for use in general fabrication, construction, tanks and boilers, repair and auto-body applications. Comprises manganese and silicon to provide good mechanical properties.

MATERIAL TO BE WELDED 
Can be used on a wide variety of mild steels, structural steel, fine-grain steel, pipe steel, boiler steel and cast steel.

SHEILDING GAS

CO2 or Argon/CO2